01-07-2021 05:14 AM
Hi Team,
As we have Cisco C2600 Series Router I want to enable the SSH V2. but i am not able to enable it the below image is running on this Device
flash:c2600-ik9o3s-mz.123-12.bin
Did i Need upgrade the image
Could you please share me the config commands and latest image to upload and configure the Router
01-07-2021 05:24 AM
can you post show version,.
also try if that commands accesspt as below :
config t
ip domain-name bb.com ( change this as required)
!
#crypto key generate rsa << is this command works ?
01-07-2021 08:49 PM
HI,
Pls find the Show Inventory
TS#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 29-Nov-04 15:40 by kellythw
Image text-base: 0x80008098, data-base: 0x81C8AAD4
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IK9O3S-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
Arris-TS uptime is 4 weeks, 2 days, 15 hours, 43 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ik9o3s-mz.123-12.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco 2610XM (MPC860P) processor (revision 0x401) with 126976K/4096K bytes of memory.
Processor board ID JMX0905L0SH (2535610085)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
32 terminal line(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
This router not support above Command fully,
TS(config)#crypto key generate rsa ?
general-keys Generate a general purpose RSA key pair for signing and encryption
usage-keys Generate separate RSA key pairs for signing and encryption
<cr>
TS(config)#crypto key generate rsa
TS(config)#ip domain name cisco.com
01-08-2021 04:26 AM
You need - c2600-entservicesk9-mz.124-19.bin (12.4(19)) or above
nice tool to check feature navigator :
01-07-2021 05:25 AM
The firmware does not support crypto.
Cisco no longer allows download to such old firmware.
Your best bet is to try looking for the firmware in the internet.
01-07-2021 08:53 PM
Hi @Leo Laohoo
Can You please sent me the link for latest firm for Cisco c2600 Router. I will upload and check the SSH V2 configs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide