Need to Make 6500 Series Switches as TFTP Server for Access Switch IOS UP Grade

[syed baseeruddin]

Hi

I need  to  Make Upgrade IOS for 2960 Switches .

want to make as 6500 Series Switches as TFTP server 

How can i make is it possible to upload IOS of 2960 Switch in 6500 series Switches

[Leo Laohoo]

If the file is stored in external CF (disk0:), then the command is: tftp disk0:filename.TAR

[syed baseeruddin]

Thanks Leo Laohoo 

Could  you Please Provide any Technical Documents or Links  to stored IOS in Core Switch

First We need to upload 2960 IOS in Flash of Core switch then Access Switches we need to assign these Commands

archive download-sw /safe tftp://192.x.x.x/c2960s-universalk9-tar.152-2a.E1.tar

[Leo Laohoo]

---

@syed baseeruddin wrote:

First We need to upload 2960 IOS in Flash of Core switch then Access Switches we need to assign these Commands

archive download-sw /safe tftp://192.x.x.x/c2960s-universalk9-tar.152-2a.E1.tar

---

1.  I would NOT recommend storing this file in the same place where the IOS of the 6500 is stored.  If there is a CF slot available, use it. 

2.  IOS you're trying to upload, you sure you want to use this particular version? I really buggy!

[syed baseeruddin]

   IOS you're trying to upload, you sure you want to use this particular version? I really buggy!

No this  version for Example I have taken

[omz]

Have a look at this - 

https://www.cisco.com/c/en/us/support/docs/routers/2500-series-routers/15092-copyimage.html#copying_one_router

Hope this helps.