Need urgent help on ip device tracking max command

[neeraj.a.verma]

Hi ,

I need urgent help, I have installed 30  3650 devices in client location

I want to run ip device tracking max 0 command on cisco 3650 switches but I think its not supported , if any one can suggest if any alternate for this command which we can run on 3650 Switches

[Philip D'Ath]

Are you wanting to disable device tracking?

[neeraj.a.verma]

Yes I want to disable ,

Thanks a lot for your help

[neeraj.a.verma]

Hi Phlip ,

This command also not supporting on 3650-FQM  at interface level - software verion 16.3.3, please suggest

[Philip D'Ath]

I would not run 16.x code unless you really have to.  It is very new.  I would stick to the more mature 3.7 or 3.6 train.

[Leo Laohoo]

I would not run 16.x code unless you really have to.

He doesn't have a choice, Philip.  FQM requires a minimum of 16.3.1.  

Bad luck, I guess. 

[Philip D'Ath]

If you want to disable it I think the command is something like "nmsp attachment suppress".  I think this might have to be applied at the interface level.

[Leo Laohoo]

IP Device Tracking needs to be enabled globally and at the interface level.  

The minimum lines of configuration needed are the following: 

1. Globaly:  ip device tracking
2. Interface-level:  ip device tracking max <ANY NUMBER HIGHER THAN 0>

To disable IP Device Tracking, use the global command "no ip device tracking" and remove the interface-level command.