I'm trying to get a 6509-E, running Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICES_WAN-M), Version 12.
2(33)SXI9, RELEASE SOFTWARE (fc2), to send netflow traffic from a vlan interface to a Solarwinds server.
The server is not seeing all the vlan traffic, but does see all the traffic on the layer 2 ports (not netflow).
I've seen that a command, ip flow ingress layer2-switched vlan, needs to be enabled, but the OS I have does not support that command.
Or could it be that MLS is not configured except for a couple commands:
mls netflow interface
mls cef error action reset
netflow setup:
Flow export v5 is enabled for main cache
Export source and destination details :
VRF ID : Default
Source(1) 10.31.101.1 (Vlan52)
Destination(1) 10.30.2.196 (2055)
Version 5 flow records
14927339 flows exported in 615072 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were dropped due to no fib
0 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
0 export packets were dropped due to Card not being able to export
interface:
interface Vlan52
description AN.VDI.stu
ip address 10.31.101.1 255.255.255.0
ip helper-address 10.31.149.200
no ip redirects
ip flow ingress
ip flow egress
ip pim neighbor-filter 98
ip pim sparse-dense-mode
ip cgmp