network segmentation with 2921 and Internet bandwidth splitting

[Adrian Ardelean]

Hi.

I'm confused about something.

Now I have a 172.16.0.0/16 network with a def. gw. for internet where is a MS Forefront TMG 2010 with BSplitter for traffic shaping.

I purchased an 2921, 2,5 GB RAM, security+data license and an EHWIC-D-8ESG.

I made 4 subnets in a test environment with some access-lists, nothing fancy yet.

How can I use FF TMG for bandwidth management, where should I put it? For those 4 subnets the def. gw. is, normally, the 2921 router. TMG is splitting traffic by client IP....

Help!

[Adrian Ardelean]

Nothing...

Let me put it in other way: let's say I have 3 subnets: 172.16.0.0/24, 172.16.2.0/23 and 172.6.5.0/24

Gi0/1 - 172.16.0.1

Gi0/2 - 172.15.5.1

Gi0/1/0 -  switchport access vlan 2 - Vlan2 - 172.16.2.1

I need to route traffic between those 3 subnets and control it with some ACLs and:

     - the internet traffic from 172.16.0.0/24 to go through 172.16.0.32

     - the internet traffic from 172.16.2.0/23 to go through 172.16.2.32

and

     - the internet traffic from 172.16.5.0/24 to go through 172.16.5.32

Is this scenario even possible?

Thanks!