cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
606
Views
0
Helpful
1
Replies

network segmentation with 2921 and Internet bandwidth splitting

Adrian Ardelean
Level 1
Level 1

Hi.

I'm confused about something.

Now I have a 172.16.0.0/16 network with a def. gw. for internet where is a MS Forefront TMG 2010 with BSplitter for traffic shaping.

I purchased an 2921, 2,5 GB RAM, security+data license and an EHWIC-D-8ESG.

I made 4 subnets in a test environment with some access-lists, nothing fancy yet.

How can I use FF TMG for bandwidth management, where should I put it? For those 4 subnets the def. gw. is, normally, the 2921 router. TMG is splitting traffic by client IP....

Help!

1 Reply 1

Adrian Ardelean
Level 1
Level 1

Nothing...

Let me put it in other way: let's say I have 3 subnets: 172.16.0.0/24, 172.16.2.0/23 and 172.6.5.0/24

Gi0/1 - 172.16.0.1

Gi0/2 - 172.15.5.1

Gi0/1/0 -  switchport access vlan 2 - Vlan2 - 172.16.2.1

I need to route traffic between those 3 subnets and control it with some ACLs and:

     - the internet traffic from 172.16.0.0/24 to go through 172.16.0.32

     - the internet traffic from 172.16.2.0/23 to go through 172.16.2.32

and

     - the internet traffic from 172.16.5.0/24 to go through 172.16.5.32

Is this scenario even possible?

Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco