08-09-2019 06:49 AM
Guys,
It is a simple question but I do not know if the answer is so simple.
When should I use one instead of the other?
Thanks,
Solved! Go to Solution.
08-09-2019 09:37 AM
Hi @fadfo ,
The Cisco C9300 is ideal for branches, for its many features.
The Nexus 3000 are designed to be used in data centers.
Therefore, in which environment you will occupy the devices.
I leave this link with the models and their characteristics:
Regards
08-09-2019 09:54 AM
if you have mode servers connected - Nexus 3K ( also for low lentency)
Cat 9300 is for Access or Small organisation enterprise Lan.
08-09-2019 09:37 AM
Hi @fadfo ,
The Cisco C9300 is ideal for branches, for its many features.
The Nexus 3000 are designed to be used in data centers.
Therefore, in which environment you will occupy the devices.
I leave this link with the models and their characteristics:
Regards
08-12-2019 06:22 AM
Hi @luis_cordova,
It will be used to connect a proxy appliance (DMZ), so it will be placed in a Data Center.
The document that you have shared is very good and based on it I think that best option will be Nexus.
Thanks,
08-09-2019 09:54 AM
if you have mode servers connected - Nexus 3K ( also for low lentency)
Cat 9300 is for Access or Small organisation enterprise Lan.
08-12-2019 06:24 AM
08-12-2019 07:20 AM
Glad it was helpful, if help you mark as solution.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide