01-27-2015 07:23 AM - edited 03-07-2019 10:24 PM
Ive a 3548 box with 24port Lic,My concern is about the functionality of the remaining 24 Ports.Will there be a problem with the rest of the 24 ports while in production.
NX3548# sh inventory
NAME: "Chassis", DESCR: "Nexus 3548 Chassis"
PID: N3K-C3548P-10G , VID: V02 , SN: XXXXXXXXXX
NAME: "Module 1", DESCR: "48x10GE Supervisor"
PID: N3K-C3548P-10G , VID: V02 , SN: XXXXXXXXXX
NX3548# SH LICense usage
Feature Ins Lic Status Expiry Date Comments
Count
--------------------------------------------------------------------------------
24P_LIC_PKG Yes - Unused Never -
24P_UPG_PKG No - Unused -
LAN_BASE_SERVICES_PKG Yes - Unused Never -
ALGO_BOOST_SERVICES_PKG No - Unused -
LAN1K9_ENT_SERVICES_PKG No - Unused -
LAN_ENTERPRISE_SERVICES_PKG No - Unused -
--------------------------------------------------------------------------------
03-28-2015 07:34 AM
Hi,
we have the same problem, did you solved?
After a reboot 4 port have problems, so we don't know about the funcionality of all the ports. Are all the 48 ports usable? If not, what are the unusable ports?
Thanks
03-28-2015 09:43 PM
Hi Andrea,
Can you please elaborate the status of those 4 ports,
I guess though our license are only for 24 Port 10 G ,We can use the rest of the ports as 1 gig.
Also we tried connecting Links on Port 1 and Port 48 to see any issues all seemed working fine.
My only concerns are which 24 Ports are applicable are for 10G.
Warm Regards,
Dhanesh
03-29-2015 12:43 AM
Hello Dhanesh,
thanks for your reply.
We have 2 3548 licensed exactly as your Nexus.
After a reboot of the two Nexus the first 4 ports (of the two) had problems (no input packets, only ouput packets, so unusable). There was connected devices with GLC-T, so they worked at 1 G, not 10G.
We opened a TAC Case about this and, after remote session and many analysis, the engineer decided to replace the two devices.
Despite this I have still some doubt.
I found the discussion below and I post some logs of one of the Nexus, we use the 10 G not in a contiguous way.
Thanks and regards
https://supportforums.cisco.com/discussion/12073821/nexus-3548-24-port-license-what-ports-use
371) Event:E_DEBUG, length:55, at 552701 usecs after Sat Mar 14 20:02:11 2015
[825307441] Couldn't send grace period data: No route to host
372) Event:E_DEBUG, length:58, at 255834 usecs after Sat Mar 14 19:02:57 2015
[825307441] Couldn't fetch grace enabled status: no such pss key
373) Event:E_DEBUG, length:55, at 819209 usecs after Sat Mar 14 19:02:18 2015
[825307441] Couldn't send grace period data: No route to host
374) Event:E_DEBUG, length:44, at 818664 usecs after Sat Mar 14 19:02:18 2015
[825307441] Failed to get VDC map: no such pss key
375) Event:E_DEBUG, length:44, at 818270 usecs after Sat Mar 14 19:02:18 2015
[825307441] Transient read error in glob_refresh()
376) Event:E_DEBUG, length:60, at 813122 usecs after Sat Mar 14 19:02:18 2015
[825307441] Expiry date for feature LAN_BASE_SERVICES_PKG: 3650000
377) Event:E_DEBUG, length:50, at 773120 usecs after Sat Mar 14 19:02:18 2015
[825307441] Expiry date for feature 24P_LIC_PKG: 3650000
378) Event:E_DEBUG, length:30, at 716563 usecs after Sat Mar 14 19:02:08 2015
[825307441] checking confcheck config
N3K-DC-1# sh int status
------------------------------------------------------------------------------------
Port Name Status Vlan Duplex Speed Type
------------------------------------------------------------------------------------
Eth1/1 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/2 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/3 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/4 *** FREE *** sfpAbsent 1 full 1000 --
Eth1/5 UCS_UPLINK_FABRIC_ connected trunk full 10G SFP-H10GB-CU5M
Eth1/6 UCS_UPLINK_FABRIC_ connected trunk full 10G SFP-H10GB-CU5M
Eth1/7 -- sfpAbsent 1 full 10G --
Eth1/8 -- sfpAbsent 1 full 10G --
Eth1/9 -- sfpAbsent 1 full 10G --
Eth1/10 -- sfpAbsent 1 full 10G --
Eth1/11 -- connected trunk full 1000 1000base-T
Eth1/12 -- connected trunk full 1000 1000base-T
Eth1/13 -- sfpAbsent 1 full 10G --
Eth1/14 -- sfpAbsent 1 full 10G --
Eth1/15 -- sfpAbsent 1 full 10G --
Eth1/16 -- sfpAbsent 1 full 10G --
Eth1/17 -- sfpAbsent 1 full 10G --
Eth1/18 -- sfpAbsent 1 full 10G --
Eth1/19 -- sfpAbsent 1 full 10G --
Eth1/20 -- sfpAbsent 1 full 10G --
Eth1/21 -- sfpAbsent 1 full 10G --
Eth1/22 -- sfpAbsent 1 full 10G --
Eth1/23 -- sfpAbsent 1 full 10G --
Eth1/24 -- sfpAbsent 1 full 10G --
Eth1/25 -- sfpAbsent 1 full 10G --
Eth1/26 -- sfpAbsent 1 full 10G --
Eth1/27 -- sfpAbsent 1 full 10G --
Eth1/28 -- sfpAbsent 1 full 10G --
Eth1/29 -- sfpAbsent 1 full 10G --
Eth1/30 -- sfpAbsent 1 full 10G --
Eth1/31 *** FREE *** notconnec 1 full 1000 1000base-T
Eth1/32 -- sfpInvali 1 full 10G 1000base-T
Eth1/33 -- sfpAbsent 1 full 10G --
Eth1/34 -- sfpAbsent 1 full 10G --
Eth1/35 -- sfpAbsent 1 full 10G --
Eth1/36 -- sfpAbsent 1 full 10G --
Eth1/37 -- sfpAbsent 1 full 10G --
Eth1/38 -- sfpAbsent 1 full 10G --
Eth1/39 -- sfpAbsent 1 full 10G --
Eth1/40 -- sfpAbsent 1 full 10G --
Eth1/41 -- sfpAbsent 1 full 10G --
Eth1/42 -- sfpAbsent 1 full 10G --
Eth1/43 -- notconnec 1 full 10G 10Gbase-SR
Eth1/44 -- notconnec 1 full 10G 10Gbase-SR
Eth1/45 C3850-CORE [Port-C connected trunk full 10G 10Gbase-SR
Eth1/46 C3850-CORE [Port-C connected trunk full 10G 10Gbase-SR
Eth1/47 vPC PeerLink [Port connected trunk full 10G SFP-H10GB-CU3M
Eth1/48 vPC PeerLink [Port connected trunk full 10G SFP-H10GB-CU3M
Po2 C3850-CORE connected trunk full 10G --
Po3 3750-DC connected trunk full a-1000 --
Po4 UCS_UPLINK_FABRIC_ connected trunk full 10G --
Po10 vPC PeerLink connected trunk full 10G --
mgmt0 -- connected routed full a-1000 --
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide