10-04-2017 10:30 AM - edited 03-08-2019 12:15 PM
Hi Team
I am having a requirement of configuring the Nexus 3k aggregator switch to collect traffic from 2 switches in the network and mirror to my log collector.
I am having one 2950 switch and a nexus 9k switch for which i need to monitor all the traffic from the both the switches and forward to the Nexus 3k . Nexus 3k needs to send the traffic to the logcollector server
Can anyone help me out to get the setup configured on Aggregator switch .
10-04-2017 04:40 PM
Hi,
If you have installed taps on the 2950 and the 9k, you need to use this switch as an aggregator. 3k is not used for tap aggregation.
https://www.ixiacom.com/products/tap-aggregators
HTH
10-07-2017 06:56 PM
HI
I have nexus 3524x switches which can be used for TAP/Span Aggregation .
Regards
Dibu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide