Hi experts,
We have a N5K-C50510P-BF. When these nexus starts that didn't booting any further than the kickstart. Here's the boot sequence log
User break into bootloader
Loader Version pr-1.3
loader>
loader> boot bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin
Booting kickstart image: bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin....
...............................................................................
........................Image verification OK
<FF>serial 00:04: unable to assign resources
INIT: platform_type cmdline parameter not found. Asssuming Oregon.
I2C - Mezz absent
Starting Nexus5010 POST...
Executing Mod 1 1 SEEPROM Test......done
Executing Mod 1 1 GigE Port Test.......done
Executing Mod 1 1 Inband GigE Test.....done
Executing Mod 1 1 NVRAM Test....done
Executing Mod 1 1 PCIE Test...............................done
Mod 1 1 Post Completed Successfully
POST is completed
can't create lock file /var/lock/mtab~185: No such file or directory (use -n flag to override)
nohup: redirecting stderr to stdout
autoneg unmodified, ignoring
autoneg unmodified, ignoring
Checking all filesystems..... done.
Loading system software
No system image INIT: Sending processes the TERM signal !!! --
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
switch(boot)# sho ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
kickstart: version 5.2(1)N1(3)
kickstart image file is: bootflash:/n5000-uk9-kickstart.5.2.1.N1.3.bin
kickstart compile time: 12/4/2012 1:00:00 [12/04/2012 09:53:21]
Hardware
RAM 3619880 kB
bootflash: 4030464 kB
--More--
(none) kernel uptime is 0 days 0 hour 1 minute(s) 42 second(s)
I try to load the system image
switch(boot)# load bootflash:n5000-uk9.5.2.1.N1.3.bin
****************INIT: Sending processes the TERM signal
switch(boot)# INIT:
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
switch(boot)#
As you to see, Nexus5010 does not load system image, falls back to kickstart.
Plz help me.