Nexus 5548 Daughter Card offline

[arueda]

Hi There,

Our customer has two Nexus 5548 with L3 daughter cards (N55-D160L3-V2) but the module shows as offline.

The base license is not installed so I think this is the issue.

How do I get a new license pkg documents to apply the licenses to these two Nexus 5K as the document can not be found anywhere.

Thanks,

Alberto

[Rajagopal Sivaramakrishnan]

Talk to your Cisco representative.. They can probably help you to get your PAK and license keys, if you bought them..  Normally the base licenses are included with the switch.. Can you please send us the "show license" output ?

Layer 3 Base License

The Layer 3 base license (N55-BAS1K9) is included with the Cisco Nexus 5500 Platform switch. The license provides the following support:

Connected, Static, RIPv2, OSPF (256 Dynamically Learnt Routes), EIGRP-Stub, HSRP, VRRP, IGMPv2/3, PIMv2, RACLs, uRPF

Layer 3 LAN-Enterprise License

The Layer 3 LAN Enterprise license (N55-LAN1K9) includes the following:

•All base license features

•Full EIGRP

•Unrestricted OSPF routes

•BGP

•VRF-Lite

[arueda]

Thanks for replaying,

it does not show anything on the output for "sh license".

and the "sho license usage" all licenses appear as not installed / unused.

sh license usage

Feature                      Ins  Lic   Status Expiry Date Comments

                                 Count

--------------------------------------------------------------------------------

FCOE_NPV_PKG                  No    -   Unused             -

FM_SERVER_PKG                 No    -   Unused             -

ENTERPRISE_PKG                No    -   Unused             -

FC_FEATURES_PKG               No    -   Unused             -

VMFEX_FEATURE_PKG             No    -   Unused             -

ENHANCED_LAYER2_PKG           No    -   Unused             -

LAN_BASE_SERVICES_PKG         No    -   Unused             -

LAN_ENTERPRISE_SERVICES_PKG   No    -   Unused             -

--------------------------------------------------------------------------------

So is there a way to get a new base license from Cisco?

Alberto

[Rajagopal Sivaramakrishnan]

Can you please look at the inventory, and confirm the following outputs:

show inventory | inc L3

show system internal btcm info 

Regards

[arueda]

  system:    version 5.2(1)N1(4)

sh inv | inc L3

NAME: "Module 3", DESCR: "O2 Daughter Card with L3 ASIC"

PID: N55-D160L3-V2     , VID: V01 , SN: FOC18039776

for the second command it does not work .. I tried and it does not have show system internal btcm ...

Thanks,

Alberto

[Rajagopal Sivaramakrishnan]

Try this:

If you don't have the LAN BASE license listed above you will be hosed, to get a copy just go to www.cisco.com/go/licensing, click on get demo, nexus 5000 and then select LAN Base license, you will see it's a permanent license you can install.

Once you login to licensing page, next to the page where you put your PAKs, there is a drop down box. Choose demo license from that.. and select 5500.. 

It wiill look like this:

Cisco Nexus 5000/5500 Series

Your Nexus license is node locked to the Serial Number of the Nexus Chassis. Read More...

Cisco Nexus 5000 Series License - Storage Protocol (FCoE) - 90-day Evaluation LicenseCisco Nexus 5500 Series License - L3 Base - Permanent license Cisco Nexus 5500 Series License - L3 Enterprise - 90-day Evaluation License Cisco Nexus 5000 Series License - NPV Mode - 90-day Evaluation License Cisco Nexus 5500 Series License - FabricPath - 90-day Evaluation License Cisco Nexus 5500 Series License - VM-FEX - 90-day Evaluation License

[ramesh rajendran]

Thanks,

But nexus documentation says VRF-Lite is supported in base lisence...Could you please confirm?

Layer 3 Base Services Package LAN_BASE_SERVICES_PKG 19	N55-BAS1K9	Unlimited static routes and maximum of 256 dynamic routes. Static routes RIPv2 OSPFv2 and OSPFv3 EIGRP Stub HSRP 20 VRRP 21 IGMP v2/v3 PIMv2 (sparse mode) VRF Lite Routed ACL
Layer 3 Enterprise Services Package LAN_ENTERPRISE_SERVICES_PKG 2223	N55-LAN1K9	N55-LAN1K9 includes below features in addition to the ones under N55-BAS1K9 license. BGP PBR PIMv2 (all modes) Full EIGRP L3 IS-IS24 uRPF MSDP

[SupportAC]

Hello,

We are having the same problem, did you manage to find a solution to the problem?