cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4592
Views
5
Helpful
2
Replies

nexus 5548 layer3 features

Hi !

does anyone knows would the layer 3 daughter card on a nexus 5548up would support -

netflow

vrf (import/export rd's between vrfs)

policy based routing

Thanks

Everyone's tags (2)
2 ACCEPTED SOLUTIONS

Accepted Solutions
Participant

nexus 5548 layer3 features

Hello Hummus,

About the support of the listed feature please find some related informations :

  • Netflow

Netflow is not supported on the 5548 (even with a L3 duaghter card).

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/qa_c67-618605_ps9670_Products_Q_and_A_Item.html

Q. Does the Cisco Nexus 5548P Switch hardware support NetFlow?

A. No. The Cisco Nexus 5548P Switch hardware does not support NetFlow.

And also check =>

https://supportforums.cisco.com/docs/DOC-13402#Q_Will_Netflow_be_supported_on_the_N5K_If_not_how_to_get_L2_flow_data

  • Vrf route leakage

Unlike N7k, the feature is not supported (at this time). According to the last configuration guide =>

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/unicast/521_N11/l3_virtual.html#wp1082535 => Cisco NX-OS prevents route leakage( import or export) between VRFs.

Aslo the subjected is discussed on this link => https://supportforums.cisco.com/thread/2123555. At the time being, route leaking is not supported on the Nexus 5500 with L3 module.

  • policy based routing

About PBR I was reading this post https://supportforums.cisco.com/message/3450230#3450230. According to Cisco guys on last march, it was not supported in the current releases, but is in the roadmap. When checking the last release notes 5.2(1)N1(1a) there is no reference on PBR support, so I suppose it is still not supported.

Hope that helps.

Best regards.

Karim

Cisco Employee

nexus 5548 layer3 features

No for all three of your questions.

HTH,

jerry

2 REPLIES 2
Participant

nexus 5548 layer3 features

Hello Hummus,

About the support of the listed feature please find some related informations :

  • Netflow

Netflow is not supported on the 5548 (even with a L3 duaghter card).

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/qa_c67-618605_ps9670_Products_Q_and_A_Item.html

Q. Does the Cisco Nexus 5548P Switch hardware support NetFlow?

A. No. The Cisco Nexus 5548P Switch hardware does not support NetFlow.

And also check =>

https://supportforums.cisco.com/docs/DOC-13402#Q_Will_Netflow_be_supported_on_the_N5K_If_not_how_to_get_L2_flow_data

  • Vrf route leakage

Unlike N7k, the feature is not supported (at this time). According to the last configuration guide =>

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/unicast/521_N11/l3_virtual.html#wp1082535 => Cisco NX-OS prevents route leakage( import or export) between VRFs.

Aslo the subjected is discussed on this link => https://supportforums.cisco.com/thread/2123555. At the time being, route leaking is not supported on the Nexus 5500 with L3 module.

  • policy based routing

About PBR I was reading this post https://supportforums.cisco.com/message/3450230#3450230. According to Cisco guys on last march, it was not supported in the current releases, but is in the roadmap. When checking the last release notes 5.2(1)N1(1a) there is no reference on PBR support, so I suppose it is still not supported.

Hope that helps.

Best regards.

Karim

Cisco Employee

nexus 5548 layer3 features

No for all three of your questions.

HTH,

jerry

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards