Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guysi have a server with 2 physical links only.over this link im passing 2 vlans in trunk ( can be Portchannel to VPC or bond active passive , doesnt matter to me ) .vlan 302 is for datavlan 303 is for backupserver on vlan 303 is pushing traffic o...
so i have a solution, and then a question on that solution : first the solution and config for any guy in the future who would need that : to configure ASA VPN to ASR :crypto keyring KEYS-SITE-B-DC local-address [asr-ip-address] pre-shared-key ad...
Hiim trying to create a VPN between a Cisco ASA5510 and an ASR1002 when my Loopback interface is The Source IP .( i understan d i cannot VPN ASA to CISCO IOS SVTI ... )so if anyone could help me here it would be Legendary -crypto keyring KEYS-WC-TE...
Hi !i have a nat statement : ip nat inside source list VLAN108_NAT interface GigabitEthernet0/1 overloadand i want to change it from interface dependent to a "floating nat" .can i use this ? ip nat pool VLAN_108_NAT_POOL 212.11.55.55 212.11.55.55 pre...
Thanks for your Comment Marcin !The ASA does not support VTIs which is what you are talking about . so the ASR must use the "OLD" method . ps i would check the Reverse Route Option , with the static option , sounds best for me when i have multiple t...
Hi all ! does the RBH value of the physical port change when i reload the machine ?can i rely on port Gi1/1 to stay RBH 0x1 when the machine boots up again [ and all others as well ] ?or does it happens randomly "first port to botup would get RBH 0x1...
Hi tom !thanks for the valuable info !just one question - do i need to purchase a special sfp for connecting my 6500 to the EWDM ? it sounds strange to me, because i suppose the EWDM device is doing all the "coloring" with mirrors , mechanically ?
