02-24-2014 06:29 PM - edited 03-07-2019 06:23 PM
Hi,
I need to implement qos on a nexus device for a client
Basically what I am trying to implement is this but on the nexus
Policy Map Enhanced_QoS_Customer_Out
Description: Enhanced QoS customers outbound Percentages
Class Cust_VoIP_Out
priority 30 (%)
Class Cust_Gold_Out
bandwidth 30 (%)
Class Cust_Silver_Out
bandwidth 13 (%)
Class Cust_Bronze_Out
bandwidth 2 (%)
Policy Map Ethernet_QoS_Customer_Out_200Mb
Class class-default
Average Rate Traffic Shaping
cir 200000000 (bps)
service-policy Enhanced_QoS_Customer_Out
Is this possible on the nexus 5596?
I havent found much information around shaping.. Please advise if the above policy is achelievable on the nexus and if not what does the nexus support?
regards,
02-24-2014 07:26 PM
Hi,
I don't think the 5500 support shaping since it is mostly a layer-2 device. Here is the config guide for QOS.
HTH
02-24-2014 08:20 PM
So looking over all the documentation, it doesn't look like shaping is supported anywhere, however policing is supported??
Do you think it would be possible to police the port and then create a child policy setting bandwidth per class?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide