09-10-2021 01:55 AM
I am using external NTP servers to set the time on my 5k's but the switch doesnt seem to be syncing....
show run | i ntp
ntp server 1.uk.pool.ntp.org
ntp server 3.uk.pool.ntp.org
ntp source-interface Vlan15
ntp logging
Total peers : 2
* - selected for sync, + - peer mode(active),Switchin
- - peer mode(passive), = - polled in client mode
remote local st poll reach delay vrf
-------------------------------------------------------------------------------
=46.17.63.196 10.10.205.249 16 64 0 0.00000 default
=139.162.192.13 10.10.205.249 16 64 0 0.00000 default
# ping 46.17.63.196
PING 46.17.63.196 (46.17.63.196): 56 data bytes
64 bytes from 46.17.63.196: icmp_seq=0 ttl=46 time=11.424 ms
64 bytes from 46.17.63.196: icmp_seq=1 ttl=46 time=11.401 ms
switch cannot ping 1.uk.pool.ntp.org by dns..
09-10-2021 02:04 AM - edited 09-10-2021 02:47 AM
Try ntp server 46.17.63.196
Do you have DNS Server configured in nexus 5K if not pelase configure, ping with DNS before it sync with NTP.
09-10-2021 02:44 AM
- Possible DNS issue may also be confirmed by using an ip address from the mentioned ntp-pools instead, if that works, then look at DNS.
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide