05-27-2017 08:45 AM - edited 03-08-2019 10:45 AM
Dear Team,
We are getting following error on the nexus switch,
cisco Nexus 6001 Chassis
version 6.0(2)N2(3)
Syslog:
2017 May 27 23:47:17 switch01 last message repeated 1 time
We are receiving above error repeatedly.
Hence kindly do the needful.
Thanks & Regards,
Ramesh Babu.A.
05-27-2017 10:42 AM
Hello,
this is not so much an error message as it rather is a standard feature in Nexus to cut down on the size of the syslog.
You can disable the message with:
conf t
logging compression disable
no logging rate-limit
05-29-2017 07:43 AM
Hi Georg,
If we execute this command then we can able to see the logs ?
Its possible.
Thanks & Regards,
Ramesh Babu.A.
05-29-2017 10:57 AM
Hello,
as I understand it, both commands shorten the log. By disabling rate limiting and compression, everything will show up in your log, making it longer...
06-03-2017 07:53 AM
Hi Georg,
Unfortunate both (compression & rate-limit) command not available,
# logging ?
abort - Flushes cached data without committing and releases the lock
commit - Commits cached data (of all msg types) and releases the lock
console - Set console logging
distribute - Enables/disables fabric distribution using cfs.
event - Interface events
ip - IP configuration
level - Facility parameter for syslog messages
logfile - Set File logging
message - Interface events
module - Set module(linecard) logging
monitor - Set terminal line(monitor) logging level
server - Enable forwarding to Remote Syslog Server
source-interface - Enable Source-Interface for Remote Syslog Server
timestamp - Set logging timestamp granularity
Hence kindly do the needful to fix this issues.
06-03-2017 08:58 AM
Like I said in my first post, the command is not available in all versions. If you have to use this command then you need to upgrade to a later version.
06-04-2017 06:07 AM
Ok sure Thanks.
Thanks for your help.
05-27-2017 02:15 PM
Hi,
I am not sure if your version support the "no logging rate-limit" command:
available options with running 6.0(2)N1(2) are:
console
distribute
event
ip
level
logfile
message
module
monitor
server
source-interface
timestamp
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide