11-22-2010 11:01 AM - edited 03-06-2019 02:10 PM
Hi All,
I have a collapsed 6509 cord switch and I am working on migrating to the Nexus platform. I've never worked on Nexus switches before and I would like to ask if someone could share a running config on a Nexus switch. Here are some of the configuration features (QoS for voice/video, Intervlan routing, VLAN, VTP, vPC, basic spanning-tree, port span or port monitoring) that I will need to configure on the nexus.
Thanks in advance !!! I appreciate any inputs/suggestions !!!
D.
Solved! Go to Solution.
11-22-2010 12:19 PM
Hi,
Check this link for configuration example, and comparison between IOS and NXOS for each feature.
http://www.cisco.com/en/US/products/ps9402/prod_configuration_examples_list.html
HTH,
Lei Tian
11-22-2010 12:19 PM
Hi,
Check this link for configuration example, and comparison between IOS and NXOS for each feature.
http://www.cisco.com/en/US/products/ps9402/prod_configuration_examples_list.html
HTH,
Lei Tian
11-22-2010 03:32 PM
Hi Lei,
The link you sent is very helpful. Do you have the config on a production Nexus 7k that you can share with me ?
Thank you very much !!!
D.
11-23-2010 11:17 AM
Hi,
Sorry, I can't share any customer configuration.
Regards,
Lei Tian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide