11-15-2010 07:03 AM - edited 03-06-2019 02:03 PM
Hello,
We are installing Nexus 7K as a data center switch. It is necessary to have VRF lite configured to separate routing tables between some VLANs. There need to be some visibility between some VRFs and global routing table. Is it possible to import route from global routing table in VRFs, like on any other L3 switch with following configuration:
interface Vlan310
ip vrf select source
ip vrf receive V2
ip vrf receive V3
Is it also possible to have route leakage between VRFs (route target export and import)?
11-24-2010 09:30 PM
Hi,
This is currently not supported in NXOS and you need to use route-maps to update the next hop.
/ijay
06-28-2013 12:52 PM
You need to run MPLS/LDP to achieve such a thing with RT Import/Export. Keep in mind that Route Targets are BGP extended communities.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide