05-26-2016 04:54 AM - edited 03-08-2019 05:57 AM
Hi all,
I am currently logged in to a VDC on a 7009 nexus switch. I have vdc-admin role. When I enter "show mac address-table" only the supervisor MAC in each VLAN is displayed and no dynamically learned MACs are displayed.
Is this right?
I was expecting to see dynamic MACs for this particular VDC.
Thanks!
Mario
(27/5 - Moved Thread)
05-26-2016 04:58 AM
Hi
its worth mentioning that we are running FabricPath on this switch.
I can get dynamic MACs if I specify a specific module... but the learned interface for each MAC is not the traditional "ethx/x"...
xxxxxx# show mac address-table 4
Legend:
* - primary entry, G - Gateway MAC, (R) - Routed MAC, (d) - dec
Age - seconds since last seen,,+ - primary entry using vPC Peer-Link
(T) - True, (F) - False, h - hex, d - decimalVDC = 3
FE VLAN/BD MAC Address Type Age Secure NTFY Ports
-----+------+-------------+--------+------+------+------+---------------
G 0 - xxxx.xxxx.xxxx static - F F sup-eth1 (R)
0 8 yyyy.yyyy.yyyy dynamic 30 F F gpc1:3564
0 28 zzzz.zzzz.zzzz dynamic 30 F F gpc1:2001
05-26-2016 08:07 AM
Even more interesting is this...
xxxxxx# show mac address-table count
MAC Entries for all vlans :
Dynamic Address Count: 0
Overlay Address Count: 0
Static Address (User-defined) Count: 0
Secure Address Count: 0
We are running NX-OS 6.2(8a) could we be hitting a bug here?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide