01-22-2024 08:27 AM
Hi all,
I have a Cisco Nexus 7K with two supervisors,
I entered the commands :
boot kickstart bootflash:/n7700-s2-kickstart.8.4.3.bin sup-1
boot system bootflash:/n7700-s2-dk9.8.4.3.bin sup-1
And now I want the standby supervisor (sup-2) to be able to take over in the event of a failover, keeping the same configurations including the IP address of the management interface. So,
Can I just enter 'boot auto-copy' cammand with no risk of restarting ?
Thanks.
Solved! Go to Solution.
01-22-2024 09:15 AM
Hello @jediaelbouanga4
To enable automatic copying of boot image files to the standby supervisor module, use the boot auto-copy command.
This command does not require a license
01-22-2024 08:31 AM
Hi,
Have a look at this link for 7Ks HA and sup redundancy.
HTH
01-22-2024 09:15 AM
Hello @jediaelbouanga4
To enable automatic copying of boot image files to the standby supervisor module, use the boot auto-copy command.
This command does not require a license
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide