Nexus 9200 with DHCP Snooping and DHCP Relay

[nelsonlopesb]

Hi all,

In the Nexus 9k documentation it is mentioned 

• DHCP snooping should not be followed by DHCP relay in the network (DHCP snooping does not work when the DHCP relay is configured on the same Nexus device).

There is any workaround to have both features working in the same Nexus cluster? It is common to see these two features working together, how can we do that in Nexus devices?

Thanks a lot

[MHM Cisco World]

I see the doc. I will read it and reply later.
thanks 

[Reza Sharifi]

Hi,

Not sure what document you are referring to, but this document (link below) shows both DHCP snooping and relay configured under the same interface.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/security/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Security_Configuration_Guide_7x_chapter_01100.html...

HTH

[nelsonlopesb]

Hi,

The doc :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/security/configuration/guide/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x/b-cisco-nexus-9000-nx-os-security-configuration-guide-93x_chapter_01110.html#id_72567

The version that we are using is 9.3(9)

thanks

Nelson