12-29-2016 12:25 AM - edited 03-08-2019 08:44 AM
Hi.. I have been running nexus 9396 switches in VPC, what I am seeing strange here is primary nexus switch has no option to set enable secret but this option is available on secondary nexus. I don't know what is problem here why I am not able to set enable secret on primary nexus.
This is working for Secondary nexus.
N9K-Pri(config)# ?
aaa Configure aaa functions
acllog Configure ACL logging
as-format Configure the router's Autonomous system number (ASN) notation
banner Configure banner message
bloggerd Blogger commands
boot Configure boot variables
callhome Enter the callhome configuration mode
cdp Configure CDP parameters
cfs CFS configuration commands
class-map Configure a class map
cli Configure CLI commands
clock Clock
control-plane Enter to control-plane sub-mode
copp Control-Plane Policing
default Rollback to default configuration
diagnostic Diagnostic commands
email Configure pipe email
errdisable Error disable
event Event Manager commands
feature Enable the feature
feature-set Enable feature-set
hardware Hardware Internal Information
hardware Hardware information
hostname Configure system's host name
hsrp HSRP interface configuration commands
hw-module Enable/Disable OBFL information
Software
BIOS: version 07.17
NXOS: version 6.1(2)I3(4a)
BIOS compile time: 09/10/2014
NXOS image file is: bootflash:///n9000-dk9.6.1.2.I3.4a.bin
NXOS compile time: 5/10/2015 1:00:00 [05/10/2015 14:29:05]
Hardware
cisco Nexus9000 C9396PX Chassis
Intel(R) Core(TM) i3-3227U C with 16402540 kB of memory.
Processor Board ID SAL1820SDLW
--------------------------------------------------------------------------------------------------------------------------------
N9K-Sec(config)# ?
aaa Configure aaa functions
acllog Configure ACL logging
as-format Configure the router's Autonomous system number (ASN) notation
banner Configure banner message
bloggerd Blogger commands
boot Configure boot variables
callhome Enter the callhome configuration mode
cdp Configure CDP parameters
cfs CFS configuration commands
class-map Configure a class map
cli Configure CLI commands
clock Clock
control-plane Enter to control-plane sub-mode
copp Control-Plane Policing
default Rollback to default configuration
diagnostic Diagnostic commands
email Configure pipe email
enable Create secret for privilege escalation
errdisable Error disable
event Event Manager commands
feature Enable the feature
feature-set Enable feature-set
hardware Hardware Internal Information
hardware Hardware information
hostname Configure system's host name
Software
BIOS: version 07.17
NXOS: version 6.1(2)I3(4a)
BIOS compile time: 09/10/2014
NXOS image file is: bootflash:///n9000-dk9.6.1.2.I3.4a.bin
NXOS compile time: 5/10/2015 1:00:00 [05/10/2015 14:29:05]
Hardware
cisco Nexus9000 C9396PX Chassis
Intel(R) Core(TM) i3-3227U C with 16402540 kB of memory.
Processor Board ID SAL1820SMKV
01-02-2017 12:45 PM
hi is the feature enabled , you have to turn everything on first in nx-os
(conft)feature privilege
enable secret should work then
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide