Nexus and Catalyst

[pablo.arcelcr]

Im trying to connect a Nexus and a 2960 catalyst using a trunk port in both sides. Also the Nexus is connected to a 3750 Catalyst that works as a L3 Switch.

I already configure the ports and everything but I'm not able to access the 2960 catalyst thru SSH, I double checked and ssh is enable also is version 2

Any thhoughts?

[Flavio Miranda]

Hi @pablo.arcelcr

First off, can you ping the switch? 

Can you share the show run from switch? 

-If I helped you somehow, please, rate it as useful.-

[Meheretab Mengistu · Accepted solution]

Please post the output of 'sh int  trunk' in addition to 'sh run' from both switches.

HTH,

Meheretab