cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
590
Views
0
Helpful
3
Replies

Nexus N2K-2348TQ environment data

bmlakar
Level 1
Level 1

Nexus N2K-2348TQ (2 units of these type) is connected to N9K-C9396PX (running code 7.0(3)I2(4))

When environment data is checked, on one unit we could see there is no data for both power supplies.

Actually we could see similar on situation also on independent DR site. Anyway, fex is working normally, both PS ok.

Just for compare I listed fex115, which is ok, and faulty printout for fex117.

 

Anyone observed similar?

 

Kind regards,

Branko

 

 

show environment fex all

...

Temperature Fex 115:
--------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
--------------------------------------------------------------------
1 Outlet-1 70 65 44 ok
1 Inlet-1 55 48 41 ok
1 Die-1 115 105 61 ok

Fan Fex : 115:
------------------------------------------------------
Fan Model Hw Status
------------------------------------------------------
Chassis N2K-2348TQ-FAN -- ok
Chassis N2K-2348TQ-FAN -- ok
Chassis N2K-2348TQ-FAN -- ok
PS-1 N2200-PAC-400W -- ok
PS-2 N2200-PAC-400W -- ok

Power Supply Fex 115:
---------------------------------------------------------------------------
Voltage: 12 Volts
-----------------------------------------------------
PS Model Power Power Status
(Watts) (Amp)
-----------------------------------------------------
1 N2200-PAC-400W 396.00 33.00 ok
2 N2200-PAC-400W 396.00 33.00 ok


Mod Model Power Power Power Power Status
Requested Requested Allocated Allocated
(Watts) (Amp) (Watts) (Amp)
--- ------------------- ------- ---------- --------- ---------- ----------
1 N2K-C2348TQ-10GE 160.80 13.40 160.80 13.40 powered-up

Power Usage Summary:
--------------------
Power Supply redundancy mode: redundant

Total Power Capacity 792.00 W

Power reserved for Supervisor(s) 160.80 W
Power currently used by Modules 0.00 W

-------------
Total Power Available 631.20 W
-------------

...

Temperature Fex 117:
--------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
--------------------------------------------------------------------
1 Outlet-1 70 65 43 ok
1 Inlet-1 55 48 40 ok
1 Die-1 115 105 57 ok

Fan Fex : 117:
------------------------------------------------------
Fan Model Hw Status
------------------------------------------------------
Chassis N2K-2348TQ-FAN -- ok
Chassis N2K-2348TQ-FAN -- ok
Chassis N2K-2348TQ-FAN -- ok
PS-1 N2200-PAC-400W -- ok
PS-2 N2200-PAC-400W -- ok

Power Supply Fex 117:
---------------------------------------------------------------------------
Voltage: 12 Volts
-----------------------------------------------------
PS Model Power Power Status
(Watts) (Amp)
-----------------------------------------------------
1 ------------ -- -- --
2 ------------ -- -- --


Mod Model Power Power Power Power Status
Requested Requested Allocated Allocated
(Watts) (Amp) (Watts) (Amp)
--- ------------------- ------- ---------- --------- ---------- ----------
1 N2K-C2348TQ-10GE 0.00 0.00 0.00 0.00 powered-up

Power Usage Summary:
--------------------
Power Supply redundancy mode: redundant

Total Power Capacity 0.00 W

Power reserved for Supervisor(s) 0.00 W
Power currently used by Modules 0.00 W

-------------
Total Power Available 0.00 W
-------------

 

show sprom fex all | include DISPLAY|Part|Product|H/W|Serial

...

DISPLAY FEX 115 SUP sprom contents
Product Number : N2K-C2348TQ-10GE
Serial Number : FOC21506SR2
Part Number : 73-16842-04
Part Revision : F0
H/W Version : 1.2
DISPLAY FEX 115 backplane sprom contents:
Product Number : N2K-C2348TQ-10GE
Serial Number : FOC2151R1PN
Part Number : 68-5579-01
Part Revision : J0
H/W Version : 1.2
DISPLAY FEX 115 power-supply 1 sprom contents:
Product Number : N2200-PAC-400W
Serial Number : DCA2139528W
Part Number : 341-0375-08
Part Revision : A1
H/W Version : 5.0
DISPLAY FEX 115 power-supply 2 sprom contents:
Product Number : N2200-PAC-400W
Serial Number : DCA2139528N
Part Number : 341-0375-08
Part Revision : A1
H/W Version : 5.0

 

DISPLAY FEX 117 SUP sprom contents
Product Number : N2K-C2348TQ-10GE
Serial Number : FOC21506SYV
Part Number : 73-16842-04
Part Revision : F0
H/W Version : 1.2
DISPLAY FEX 117 backplane sprom contents:
Product Number : N2K-C2348TQ-10GE
Serial Number : FOC2151R1PY
Part Number : 68-5579-01
Part Revision : J0
H/W Version : 1.2

 

 

 

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Seems to be a cosmetic bug since the unit is working fine.

You may want to open a case for it.  Cisco most likely recommends an upgrade.

HTH

 

Hi Reza;

 

Yes, it is probably cosmetic bug since units are working normally.

 

Thanks for replay.

 

Best regards,

Branko

Hi,

Correct. But I would still open a ticket to make sure Cisco knows about it and see if it is a known bug or not.

HTH 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card