Nexus7000 C7010 (10 Slot) Chassis with N7K-SUP1, VPC and jumbo frames

[darin.marais]

Hello,

Is there anyone on this forum that would be able to help me answer to this question!

Is jumbo frames MTU 9216 supported across a VPC between 2 x Nexus7000 C7010 (10 Slot) Chassis with Supervisor module-1X" PID: N7K-SUP1 , VID: V15 and  BIOS: version 3.22.0 / kickstart: version 6.0(3) / system: version 6.0(3) / BIOS compile time: 02/20/10

Yes I am well aware that the product is end of life / end of support! 

Thanks in advance!

[Steven268Danner]

Jumbo frames with an MTU of 9216 are typically supported on Nexus 7000 series switches. However, since the product is end of life/support, it’s best to refer to the original documentation or community forums for confirmation, as official support may no longer be available for queries on legacy systems.

[darin.marais]

Helpful but is MTU 9216 possible across a VPC between 2 x Nexus7000 C7010 (10 Slot) Chassis with Supervisor module-1X" PID: N7K-SUP1 , VID: V15 and system: version 6.0(3)

[MHM Cisco World]

Config mtu 9216 and then ping between any two svi using this mtu and df bit set and see if packet will pass or not.

MHM