NIC Teaming/Bonding
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-02-2013 11:26 PM - edited 03-10-2019 12:24 PM
Do anyone has a doc or link for NIC teaming/bonding ?
Thanks in advance.
Regards,
Chandu
- Labels:
-
Other Switching
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-02-2013 11:53 PM
Hi Chandu,
NIC teaming is the process of grouping together several physical NICs into one single logical NIC, it can be used for network fault tolerance and transmit load balance. The process of grouping NICs is called teaming.
It has two purposes:
Fault Tolerance: By teaming more than one physical NIC to a logical NIC, high availability is maximized. Even if one NIC fails, the network connection does not cease and continues to operate on other NICs.
Load Balancing: Balancing the network traffic load on a server can enhance the functionality of the server and the network.
example: http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008089a821.shtml
Hope it helps.
Regards
Dont forget to rate helpful posts.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-03-2013 01:05 AM
Thanks for the help Sundeep.
Can you elobarate it in the Datacentre point of view ? I mean how it is used on servers in DC.
Regards,
Chandu
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-03-2013 07:34 AM
HI Chandu,
Check these post.
http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008014edfa.shtml
https://supportforums.cisco.com/thread/2073771
https://supportforums.cisco.com/thread/2047011
Regards
Dont forget to rate helpful posts.
