03-03-2011 05:54 AM - edited 03-06-2019 03:52 PM
I just upgraded a WS-C3750G-48TS-S switch with c3750-ipservicesk9-mz.122-55.SE.bin and It doesn't have the crypto commands to enable SSH. I thought any image with K9 in the name will allow SSH?
Thanks Pat.
03-03-2011 06:18 AM
Hi,
It must support to generate rsa key.
However please follow the below link for more informaiton.
http://www.techrepublic.com/article/configure-ssh-on-your-cisco-router/5875046
Also please compare your config with below...
conf t
line vty 0 4
password cisco
transport input ssh
transport preferred ssh
#crypto key generate rsa
Please rate the helpfull posts.
Regards,
Naidu.
03-03-2011 06:31 AM
Thanks Naidu for the response but, I've configured an ip domain and tried to generate the keys with crypto...... but the switch says unrecognized after I issue 'crypto ?'
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide