no Crypto commands

[Patrick McHenry]

I just upgraded a WS-C3750G-48TS-S switch with c3750-ipservicesk9-mz.122-55.SE.bin and It doesn't have the crypto commands to enable SSH. I thought any image with K9 in the name will allow SSH?

Thanks Pat.

[Latchum Naidu]

Hi,

It must support to generate rsa key.
However please follow the below link for more informaiton.
http://www.techrepublic.com/article/configure-ssh-on-your-cisco-router/5875046

Also please compare your config with below...

conf t
line vty 0 4
password cisco
transport input ssh
transport preferred ssh

#crypto key generate rsa

Please rate the helpfull posts.
Regards,
Naidu.

[Patrick McHenry]

Thanks Naidu for the response but, I've configured an ip domain and tried to generate the keys with crypto...... but the switch says unrecognized after I issue 'crypto ?'