07-11-2012 07:21 AM - edited 03-07-2019 07:43 AM
Hi All,
I am trying to enter this command in Cisco 2960 but the device is not accepting it. Is this because of IOS or this command is not available for 2960?
Thanks in advance.
Akhil Abrol
Solved! Go to Solution.
07-11-2012 07:56 AM
Hello Akhil,
This is perhaps a slightly evasive question but do you need to use that command at all? What do you want to accomplish? The 2960 series switches are mostly used as Layer2 access switches (i.e. no routing is involved) and seldom, if ever, are configured for IP Helper operation. Therefore, this command would be useless in majority of cases.
Best regards,
Peter
07-11-2012 07:56 AM
Hello Akhil,
This is perhaps a slightly evasive question but do you need to use that command at all? What do you want to accomplish? The 2960 series switches are mostly used as Layer2 access switches (i.e. no routing is involved) and seldom, if ever, are configured for IP Helper operation. Therefore, this command would be useless in majority of cases.
Best regards,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide