No Output on HyperTerminal from 2960X

[Terence Lockette]

I've have rebuilt several 2960 series switches by either erasing or formatting the flash and then reloading a new image.  I have a 24 port 2960X-PSL that refuses to allow me to type or at least display any output (with the exception of initial boot output).  Now I have a switch that I can't reimage and configure.  I currently use ZOC terminal and have tried HyperTerminal to no avail.  I changed the baud rate from 9600 to 115200 so the file transfer can happen quicker.  Hitting enter or any keys does nothing.  Can anyone tell me why this is happening?

[Reza Sharifi]

Try testing with Putty.  Its free.

HTH

[Terence Lockette]

Even if putty works and I get output, I don't see an option to transfer a file via xmodem.

[Terence Lockette]

Reza,

I was able to get this to work.  It was a serial setting for hardware that I had to set to off.  Not sure how/why this was changed.  All seems to be working now.

[Reza Sharifi]

Thanks for the update Terence!

Glad to know its all working now.