No private-vlan command in Cisco C3560 Switch

[Tin Nguyen]

Hello guys.

I'm studying Private VLAN on C3560 Cisco Switch hardware. When i enter the

(config-vlan)#

It doesn't contain the private-vlan command in the list of available commands. I turned the VTP mode to Transparent, VTP version = 1. VLAN 500 is created and active. IOS = 12.2(55)SE5. I followed this document in practiced [Catalyst 3560 Switch Software Configuration Guide, Release 12.2(55)SE] Still don't know why.

The version is here 

How can i get through this situation? Thanks in advance.

Later i figured out my switch don't have  (config)#feature  as well.

[jdesanti · Accepted solution]

Hello,

Private Vlan is supported on 3560s from ipbase license and I noticed you are using lanbase.

You can verify which feature is supported on which platform easily and quickly using the Cisco Feature Navigator.

http://cfn.cloudapps.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp