cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

714
Views
0
Helpful
4
Replies
Highlighted
Beginner

no switchport in 3750-x

Hi guys,

I have 3750-x switch with (c3750e-universalk9-mz.122-55.SE5.bin)

no switchport command did not work(command rejected not allowed on this interface)

to assign IP to the interface

should Iupgrade the IOS and what is the image name that I need

or its license issue

your help is highly appreciated

4 REPLIES 4
Highlighted
VIP Mentor

Are you running the LAN Base

Are you running the LAN Base license? There you can only configure SVIs and no routed ports. For routed ports, the "ip base" license is needed.
Highlighted
Beginner

thanks Karsten Iwen for your

thanks Karsten Iwen for your replay

yes its LAN Base license 

and I will use OSPF is it covered with ip base license  or ip services?

Highlighted
Hall of Fame Expert

If you are planning to run

If you are planning to run full OSPF, you need IP Services license, as IP Base has some protocol limitations.

HTH

Highlighted
Beginner

Try using ipservicesk ISO

Try using ipservicesk ISO like c3750-ipservicesk9-mz.122-55.se10.bin

CreatePlease to create content
Content for Community-Ad