cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1654
Views
0
Helpful
3
Replies

not getting ip from DHCP through 2960 switch

csc010854800
Level 1
Level 1

PC's are not getting ip address from the DHCP server which is connected beyond 2960 switch.

broadband router(DHCP Server)--------------------------Switch 2960---------------------------PC(DHCP client)

but when i directly connect PC to the broadband router , pc is getting ip address.

i have tried using following options but of no use.

# ip dhcp snooping vlan 1

# ip dhcp snooping trust

# ip dhcp snooping information option allow-untrusted

can anyone provide the config  and help

thanks in advance.

3 Replies 3

andrew.prince
Level 10
Level 10

Post config of switch and router for review.

Sent from Cisco Technical Support iPad App

manju.cisco
Level 3
Level 3

yes please post your configs,

Is the port where the DHCP server connects to the swtich is an access port or trunk port ??

wilrow113
Level 1
Level 1

If you set a static address on a pc and attached to the switch can it ping the dhcp server

Can the switch management address ping the dhcp server and are they in the same subnet

Sent from Cisco Technical Support iPad App

Review Cisco Networking for a $25 gift card