03-18-2014 12:27 PM - edited 03-07-2019 06:45 PM
Hi,
On a 3750X that is routing vlans, is there a mechanism to treat one particular vlan differently so it cannot be routed?
This switch is connected an ASA inside interface and to the same ASA dmz interface (not our recommended way of doing things) but we need dmz traffic to be isloated. I know policy based routing might be the only solution other than the recommend solution of a physically separate switch.
Thanks.
Solved! Go to Solution.
03-18-2014 12:40 PM
On a 3750X that is routing vlans, is there a mechanism to treat one particular vlan differently so it cannot be routed?
Yes, remove the L3 vlan interface (SVI) for this vlan from the switch config and the switch will then not be able to route the traffic.
Jon
03-18-2014 12:40 PM
On a 3750X that is routing vlans, is there a mechanism to treat one particular vlan differently so it cannot be routed?
Yes, remove the L3 vlan interface (SVI) for this vlan from the switch config and the switch will then not be able to route the traffic.
Jon
03-18-2014 12:47 PM
Thanks Jon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide