12-17-2017 05:06 AM - edited 03-08-2019 01:08 PM
Hi All,
can someone please help me here.My requirement is I wanted to receieve mac address details on syslog server whenever someone connects their device to access switch user ports.
Switch model
WS-C4507R+E |
IOS:
Version 15.2(2)E4 |
Appreciate your help
Regards
Jith
12-17-2017 06:09 AM
Hello,
the below should work:
Globally:
mac-address-table notification
snmp-server enable traps mac-notification
Interface(s):
interface range fastEthernet 0/1-48
snmp trap mac-notification added
12-19-2017 07:56 AM
01-09-2018 03:52 PM
can we accomplish it with out SNMP .I just have syslog and SNMP is not enabled in it
Regards
01-09-2018 03:54 PM
12-17-2017 11:43 AM
12-19-2017 07:58 AM
12-19-2017 03:19 PM
1. Go to Settings (circle with three bars on the upper left-hand corner) > Monitor > Monitoring Tools > Clients and Users.
2. Filter the MAC address you want.
3. Above the column, choose the option "Track Clients".
4. Enter the necessary details.
Don't forget to rate our useful post(s).
12-19-2017 03:34 PM
On a side note, be aware that as to my best knowledge Prime is quite expensive (500 device license is about $9,000), so if all you want is MAC address notification, it might be overkill.
Unless the pricing has changed significantly recently...:)
01-09-2018 03:59 PM
Hi Leo,
Can we do it with out SNMP configuration.I need to get a syslog on the syslog server which have SNMP enabled on it and we dont have cisco prime
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide