09-20-2011 12:58 PM - edited 03-07-2019 02:19 AM
Hello all,
Currently our system is using RPR+ instead of SSO. After doing some research I can't find any info for my concerns. What I would like to know is whether or not changing from RPR+ to SSO on a production switch will have any impact on it's performance, or can I just change the redundancy mode without any worries?
Thanks.
09-20-2011 01:07 PM
Chris
The only impact should be that the standby supervisor is reset.
Still with these sort of things if you can get an outage i would.
Jon
09-23-2011 12:20 PM
So does having the standby supervisor reset have any real affect on the switch's activity, considering everything goes according to plan? Are there any reprocussions that I should be considering?
09-23-2011 12:23 PM
resetting the stand-by switch does not effect the primary Sup. So, production should not be effected, but as Jon also noted, it is a good idea to do it in an outage window.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide