cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

269
Views
0
Helpful
1
Replies
Highlighted
Beginner

NX-OS 9K Switch IPV6 CLI Commands

Ladies and Gents,

 

I have scoured the internet for a how-to on this and cannot find anything.  I need to apply IPV6 Multicast on several VLANs for this specific system.  The closest I have got to configuration is "IPV6 MLD Snooping" which does not work with this IOS.  The switches are not in front of me but the NXUS IOS is a 7.0.

 

Any suggestions would be helpful.

Everyone's tags (3)
1 REPLY 1
Highlighted
VIP Mentor

Re: NX-OS 9K Switch IPV6 CLI Commands

Not sure what you trying to accomplish, as per i know 6.X was not supported MLD

But 7.X should be supported as per below guide :

 

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_7x...

BB
*** Rate All Helpful Responses ***
CreatePlease to create content
Content for Community-Ad