NX-OS 9K Switch IPV6 CLI Commands

[JaredWhitman]

Ladies and Gents,

I have scoured the internet for a how-to on this and cannot find anything.  I need to apply IPV6 Multicast on several VLANs for this specific system.  The closest I have got to configuration is "IPV6 MLD Snooping" which does not work with this IOS.  The switches are not in front of me but the NXUS IOS is a 7.0.

Any suggestions would be helpful.

[balaji.bandi]

Not sure what you trying to accomplish, as per i know 6.X was not supported MLD

But 7.X should be supported as per below guide :

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/multicast/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Multicast_Routing_Configuration_Guide_7x...