05-30-2013 12:11 AM - edited 03-07-2019 01:38 PM
Hi,
I have started to use ip extended access-lists on several 3750X-switches to filter inbound and outbond traffic on the VLANs. But it seems that the use of object-groups is not supported, is this correct? Is it really no way to group different ip-addresses into groups and then use these groups in the access-lists?
I am running sw version 15.0(1)SE2.
Best regards,
Thor-Egil
Solved! Go to Solution.
05-30-2013 12:49 AM
Hello, It is not supported on switches.
I had a brief look at the cisco feature navigator http://tools.cisco.com/ITDIT/CFN/ and it only shows support on router type platforms - not switches.
With exception to the 6500
Hope this helps
Please rate useful posts & remember to mark any solved questions as answered. Thank you.
05-30-2013 12:49 AM
Hello, It is not supported on switches.
I had a brief look at the cisco feature navigator http://tools.cisco.com/ITDIT/CFN/ and it only shows support on router type platforms - not switches.
With exception to the 6500
Hope this helps
Please rate useful posts & remember to mark any solved questions as answered. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide