OID to find the status of the switch in the stack

[Pear11]

Hi,

----------------------------------------------------------------------------

OID number:

cswSwitchState(1.3.6.1.4.1.9.9.500.1.2.1.1.6) of the
CISCO-STACK-WISE-MIB to monitor the state of individual members of the
stack. In case a switch is removed from the stack, it would return a value of
11(Removed) for the corresponding switch and for switches active in the
stack, it would return 4(Ready). Also the notification indicates the switch
number that has been removed from the stack

For more info: https://community.cisco.com/t5/switching/cisco-3750-stack-oid-to-check-a-single-switch-down/td-p/1607541

------------------------------------------------------------------------------

Could you please explain below numbers, These combination of dotted numbers called object identifiers(OID)

1.3.6.1.4.1.9.9.500.1.2.1.1.6.1001 

1 -

3 - 

6 - 

1 - 

and so on. 

Or is it default command from cisco to check the status of the switch in the stack..

Please revert as a earliest....

Thanks,,

[Georg Pauwen]

Hello, 

not sure what your question is: you want to know what an object identifier (OID) is ?

Check the explanation below:

https://en.wikipedia.org/wiki/Object_identifier

[balaji.bandi]

As suggest in the post, do snmp walk with your switch, with the output you will understand.