on multilink interface ip load-sharing per-packet in not available

[sgopikrishnan]

When tring to enable this command i am not geting the per-packet option

7609-2(config)# int mul 11

7609-2(config-if)#ip load-sharing

7609-2(config-if)#ip load-sharing ?

per-destination Deterministic distribution

---------------

Is there any hidden command

dCEF is enabled

Image is 12.2(33)SRA5

Thanks

GK

[Brandon Buffin]

GK,

On the 7600 series, you can only using per-packet load sharing for software switching using the MSFC. You cannot perform per-packet load sharing in hardware.

Hope this helps.

Brandon