10-17-2020 01:21 AM
ISP1 and ISP2 is connected to WAN (c2960). c2960 is in our network just to terminate ISPs on it. and 2 3 PCs are connected with it for testing.
WAN (c2960) is connected to Core (Nexus 5k)
yesterday an issue occur in our network. During which we were unable to access our WAN (c2960), meanwhile ISP2 completely goes down, while ISP1 was working somehow ok. also we were able to ping/access our PCs connected to WAN (c2960). only ISP2 and management of WAN switch was gone. so we reboot the WAN switch, but issue did not get resolve.
After half hour everything goes to normal.
our all switches are in separate management VLAN.
please help me and explain how do i find out what happened at that time.
did we observe some broadcast from ISP2?
I have checked the PRTG graphs of WAN (c2960), there was no any abnormal graph. i also checked the logs (show logging) on WAN switch but there was nothing.
please tell me what else information you need to know.
I will really appreciate everyone's help.
THANKS
10-17-2020 02:48 AM
- Coordinate any resolving-efforts with the malfunctioning-isp (provider) too
M.
10-17-2020 06:06 AM
yes i have coordinated with the ISP. they are refusing anything. however i have coordinated with our sister company's IT person, as per him they also face some issue. we both have same ISP but our networks are totally different/isolated.
10-17-2020 03:12 AM
Hello,
does the log (sh log) of the 2960 show anything ?
10-17-2020 05:58 AM
thanks for the reply.
no "show logging" did not display any log.
10-17-2020 04:11 AM
do show version
in output you can see what make router restart.
hope this help you.
10-17-2020 06:02 AM
dear i am not taking about any router. it is our switch cisco c2960.
10-18-2020 12:25 PM
all have same filed.
router or SW
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide