07-29-2020 12:27 AM
Hi Everyone,
In a stack, member switch (Cisco 9300-48P) went into removed state after reload.
Switch# Role Mac Address Priority Version Current State
-------------------------------------------------------------------------------------
*1 Active 4ce1.75f1.a400 1 V03 Ready
2 Member 0000.0000.0000 0 V03 Removed
Is there any possible way to fix it without reload
As I can see in "show logging"
%HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 2: EMP_RELAY: Channel DOWN!
Please share you thoughts !
08-08-2021 11:37 PM
Below you will find the full log starting from the afternoon on August 5.
Some other weird behavior because the switch 1 rebooted last Friday at 21:32 for no obvious reasons and now it is as standby and switch 2 is now active. I really don't understand what is going on here. Hopefully the logs below can be helpful.
*Aug 5 14:47:45.306: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled *Aug 5 14:47:45.369: %REDUNDANCY-3-PEER_MONITOR: PEER_FOUND event on standby *Aug 5 14:48:08.883: BFD: brace register success *Aug 5 14:48:09.437: %CRYPTO-4-AUDITWARN: Encryption audit check could not be performed *Aug 5 14:48:09.437: %CRYPTO_ENGINE-4-CSDL_COMPLIANCE_DISABLED: Cisco PSB security compliance has been disabled *Aug 5 14:48:09.608: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan *Aug 5 14:48:10.014: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 1: signal on power supply A is restored *Aug 5 14:48:10.018: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 2: signal on power supply A is restored *Aug 5 14:48:12.119: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default Aug 5 14:48:16.475: %SYS-7-NVRAM_INIT_WAIT_TIME: Waited 0 seconds for NVRAM to be available Aug 5 14:48:16.928: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2309131166 has been generated or imported by crypto config Aug 5 16:48:17: %SYS-5-LOG_CONFIG_CHANGE: Buffer logging: level debugging, xml disabled, filtering disabled, size (65536) Aug 5 16:48:17: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: SLA-TrustPoint created succesfully Aug 5 16:48:17: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: TP-self-signed-2309131166 created succesfully Aug 5 16:48:17: %CRYPTO_ENGINE-5-KEY_REPLACE: A key named TP-self-signed-2309131166 has been replaced by crypto config with new key data Aug 5 16:48:17: %SSH-5-DISABLED: SSH 1.99 has been disabled Aug 5 16:48:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down Aug 5 16:48:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface Bluetooth0/4, changed state to down Aug 5 16:48:25: %SSH-5-ENABLED: SSH 1.99 has been enabled Aug 5 16:48:25: %SYS-5-RESTART: System restarted -- Cisco IOS Software [Amsterdam], Catalyst L3 Switch Software (CAT9K_LITE_IOSXE), Version 17.3.3, RELEASE SOFTWARE (fc7) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2021 by Cisco Systems, Inc. Compiled Thu 04-Mar-21 08:48 by mcpre Aug 5 16:48:29: %PKI-4-NOAUTOSAVE: Configuration was modified. Issue "write memory" to save new certificate Aug 5 16:48:31: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF Aug 5 16:48:32: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully Aug 5 16:48:32: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi Aug 5 16:48:32: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully Aug 5 16:48:33: %PLATFORM-6-RF_PROG_SUCCESS: RF state STANDBY HOT Aug 5 16:48:35: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-2309131166.server has been generated or imported by crypto-engine Aug 6 21:30:22: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 2: EMP_RELAY: Channel UP! Aug 6 21:30:22: %PLATFORM-6-HASTATUS: RP switchover, received chassis event to become active Aug 6 21:30:22: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT) Aug 6 21:30:22: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN) Aug 6 21:30:22: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_STATE_CHANGE) Aug 6 21:30:23: %PLATFORM-6-HASTATUS: RP switchover, sent message became active. IOS is ready to switch to primary after chassis confirmation Aug 6 21:30:23: %PLATFORM-6-HASTATUS: RP switchover, received chassis event became active Aug 6 21:30:23: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 1: signal on power supply A is restored Aug 6 21:30:23: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 2: signal on power supply A is restored Aug 6 21:30:23: %PLATFORM-6-HASTATUS_DETAIL: RP switchover, received chassis event became active. Switch to primary (count 1) Aug 6 21:30:23: %HA-6-SWITCHOVER: Route Processor switched from standby to being active Aug 6 19:30:23.909: Unable to set IPV4 table id for BT interface Aug 6 19:30:23.918: Unable to set IPV6 table id for BT interface Aug 6 21:30:22: %STACKMGR-4-SWITCH_REMOVED: Switch 2 R0/0: stack_mgr: Switch 1 has been removed from the stack. Aug 6 21:30:24: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP Aug 6 21:30:22: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 1 on Switch 2 is down Aug 6 21:30:22: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 2 on Switch 2 is down Aug 6 19:30:24.101: pm_port_em_recovery Aug 6 21:30:24: %HMANRP-5-CHASSIS_DOWN_EVENT: Chassis 1 gone DOWN! Aug 6 21:30:25: %LINK-3-UPDOWN: Interface Lsmpi11/3, changed state to up Aug 6 21:30:25: %LINK-3-UPDOWN: Interface EOBC11/1, changed state to up Aug 6 21:30:25: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN11/2, changed state to up Aug 6 21:30:25: %LINK-3-UPDOWN: Interface LIIN11/2, changed state to up Aug 6 21:30:25: %LINK-3-UPDOWN: Interface Null0, changed state to up Aug 6 21:30:25: %LINK-3-UPDOWN: Interface Vlan1, changed state to up Aug 6 21:30:25: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/1/1, changed state to up Aug 6 21:30:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi11/3, changed state to up Aug 6 21:30:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC11/1, changed state to up Aug 6 21:30:26: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing. Aug 6 21:30:26: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down Aug 6 21:30:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface Null0, changed state to up Aug 6 21:30:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up Aug 6 21:30:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet2/1/1, changed state to up Aug 6 21:30:26: %SMART_LIC-6-REPORTING_REQUIRED: A Usage report acknowledgement will be required in 50 days. Aug 6 21:30:33: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP Aug 6 21:32:34: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name Aug 6 21:32:52: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 2 on Switch 2 is up Aug 6 21:32:56: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 1 on Switch 2 is up Aug 6 21:32:58: %STACKMGR-4-SWITCH_ADDED: Switch 2 R0/0: stack_mgr: Switch 1 has been added to the stack. Aug 6 21:33:01: %STACKMGR-4-SWITCH_ADDED: Switch 2 R0/0: stack_mgr: Switch 1 has been added to the stack. Aug 6 21:33:02: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 1: signal on power supply A is restored Aug 6 21:33:05: %PLATFORM_FEP-1-FRU_PS_SIGNAL_OK: Switch 1: signal on power supply A is restored Aug 6 21:33:08: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP! Aug 6 19:33:09.841: ILP:: POE POST for switch 1: PASS Dec 12 05:37:13: %IOSXE-3-PLATFORM: Switch 1 R0/0: kernel: pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 Dec 12 05:37:13: %IOSXE-3-PLATFORM: Switch 1 R0/0: kernel: pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 Aug 6 21:32:56: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is down Aug 6 21:32:56: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down Aug 6 21:32:57: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is up Aug 6 21:32:57: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is up Aug 6 21:32:57: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack. Aug 6 21:33:00: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack. Aug 6 21:33:17: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up Aug 6 21:33:18: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up Aug 6 21:34:12: %PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Te1/1/1 Aug 6 21:34:20: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to up Aug 6 21:34:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to up Aug 6 21:34:29: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name Aug 6 21:35:05: %IOSXE_REDUNDANCY-6-PEER: Active detected switch 1 as standby. Aug 6 21:35:05: %STACKMGR-6-STANDBY_ELECTED: Switch 2 R0/0: stack_mgr: Switch 1 has been elected STANDBY. Aug 6 21:35:15: %REDUNDANCY-3-REDUNDANCY_ALARMS: Unable to deassert REDUNDANCY alarm Aug 6 21:35:15: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4)) Aug 6 21:35:15: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5)) Aug 6 21:35:20: %REDUNDANCY-3-REDUNDANCY_ALARMS: Unable to deassert REDUNDANCY alarm Aug 6 21:35:20: %REDUNDANCY-3-REDUNDANCY_ALARMS: Unable to deassert REDUNDANCY alarm Aug 6 21:35:52: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded Aug 6 21:35:53: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO) Aug 6 21:37:12: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name Aug 7 21:30:25: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Communications failure Aug 7 21:37:21: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name Aug 8 21:37:30: %SMART_LIC-3-COMM_FAILED: Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name
08-09-2021 12:58 AM
I want to see those two files, @MichaelBalzer77353.
08-09-2021 01:08 AM
Could you kindly provide me with your email address where I can send you these files?
08-09-2021 01:25 AM - edited 08-09-2021 01:27 AM
@MichaelBalzer77353 wrote:
Could you kindly provide me with your email address where I can send you these files?
Those files do not contain anything confidential.
If it still not possible, contact Cisco TAC and get them to analyze the crashinfo files.
Another option is use a search engine and search for the following term: cisco "stack merge" bug
08-09-2021 08:02 AM
Looks like this could be the bug: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvq56135
I am going to open a TAC case.
08-05-2021 06:57 AM
Here are the output of the commands requested above:
sw#dir flash-2: Directory of flash-2:/ 8106 -rw- 2097152 Aug 5 2021 12:09:30 +02:00 nvram_config_bkup 8112 -rw- 2097152 Aug 5 2021 12:09:30 +02:00 nvram_config 40481 drwx 4096 Aug 5 2021 11:10:46 +02:00 .installer 8109 -rw- 556 Aug 5 2021 11:09:30 +02:00 vlan.dat 48579 drwx 4096 Aug 5 2021 11:09:26 +02:00 license_evlog 56673 drwx 4096 Aug 5 2021 11:09:09 +02:00 .prst_sync 8107 -rw- 15139 Aug 5 2021 11:08:04 +02:00 rdope_out.txt 8105 -rw- 0 Aug 5 2021 11:08:04 +02:00 dope_hist 8108 -rw- 89 Aug 5 2021 11:08:01 +02:00 rdope.log 8102 -rw- 134458 Aug 5 2021 11:05:55 +02:00 memleak.tcl 8098 -rw- 2130 Aug 5 2021 11:05:40 +02:00 boothelper.log 80984 drwx 4096 Aug 5 2021 11:05:38 +02:00 dc_profile_dir 8099 -rw- 407 Aug 5 2021 11:05:19 +02:00 bootloader_evt_handle.log 8110 drwx 4096 Aug 5 2021 11:04:08 +02:00 .rommon_sync 8101 -rw- 2130 Aug 5 2021 10:59:05 +02:00 boothelper.log.old 40491 drwx 4096 Jun 28 2021 11:57:05 +02:00 pnp-tech 48578 drwx 4096 May 24 2021 12:17:45 +02:00 .rollback_timer 40518 -rw- 40648801 May 24 2021 12:12:24 +02:00 cat9k_lite-rpboot.17.03.03.SPA.pkg 40514 -rw- 4919 May 24 2021 12:12:24 +02:00 packages.conf 40517 -rw- 11031572 May 24 2021 12:11:00 +02:00 cat9k_lite-webui.17.03.03.SPA.pkg 40516 -rw- 4133912 May 24 2021 12:11:00 +02:00 cat9k_lite-srdriver.17.03.03.SPA.pkg 40515 -rw- 426931224 May 24 2021 12:11:00 +02:00 cat9k_lite-rpbase.17.03.03.SPA.pkg 40486 drwx 4096 May 24 2021 12:05:48 +02:00 .dbpersist 40484 drwx 4096 May 24 2021 12:02:56 +02:00 core 48580 drwx 4096 May 24 2021 12:02:36 +02:00 pnp-info 40488 drwx 4096 May 24 2021 12:02:35 +02:00 onep 89057 drwx 4096 May 24 2021 12:01:21 +02:00 .USWAP 113345 drwx 4096 May 24 2021 11:56:40 +02:00 Tbot 105249 drwx 4096 May 24 2021 11:56:39 +02:00 .CRFT 80986 drwx 4096 May 24 2021 11:56:33 +02:00 sys_report 80961 drwx 4096 May 24 2021 11:56:32 +02:00 tech_support 56676 drwx 4096 May 24 2021 11:56:32 +02:00 ss_disc 8100 -rw- 5242880 May 24 2021 11:56:32 +02:00 ssd 1956904960 bytes total (1359216640 bytes free) sw#dir flash-2:core Directory of flash-2:/core/ 40490 -rw- 1 Aug 5 2021 14:09:26 +02:00 .callhome 64769 drwx 4096 May 24 2021 11:56:29 +02:00 modules 1956904960 bytes total (1359216640 bytes free) sw#dir crashinfo-2: Directory of crashinfo-2:/ 29313 drwx 24576 Aug 5 2021 14:19:42 +02:00 tracelogs 15 -rw- 11033250 Aug 5 2021 10:57:35 +02:00 sw_2_RP_0-system-report_2_20210805-105728-CEST.tar.gz 14 -rw- 2932907 Aug 4 2021 19:48:30 +02:00 sw_2_RP_0_trace_archive_0-20210804-194826.tar.gz 13 -rw- 9819246 Aug 4 2021 18:00:54 +02:00 sw_2_RP_0-system-report_2_20210804-180048-CEST.tar.gz 11 -rw- 2797408 Aug 4 2021 18:00:46 +02:00 sw_2_RP_0_trace_archive_0-20210804-180041.tar.gz 12 -rw- 0 Dec 12 2020 05:36:51 +01:00 koops.dat 825753600 bytes total (751304704 bytes free) sw#sh log on switch 2 uptime detail -------------------------------------------------------------------------------- UPTIME SUMMARY INFORMATION -------------------------------------------------------------------------------- First customer power on : 05/24/2021 12:01:55 Total uptime : 0 years 0 weeks 1 days 0 hours 43 minutes Total downtime : 0 years 10 weeks 2 days 1 hours 20 minutes Number of resets : 8 Number of slot changes : 1 Current reset reason : Reload Slot Command Current reset timestamp : 08/05/2021 11:06:41 Current slot : 2 Chassis type : 247 Current uptime : 0 years 0 weeks 0 days 3 hours 0 minutes -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- UPTIME CONTINUOUS INFORMATION -------------------------------------------------------------------------------- Time Stamp | Reset | Uptime MM/DD/YYYY HH:MM:SS | Reason | years weeks days hours minutes -------------------------------------------------------------------------------- 05/24/2021 12:01:55 Power Failure or Unknown 0 0 0 0 0 05/24/2021 12:20:42 Image Install 0 0 0 0 15 05/24/2021 12:24:27 Reload Command 0 0 0 0 0 06/28/2021 11:54:49 Power Failure or Unknown 0 0 0 0 0 06/28/2021 15:37:30 Power Failure or Unknown 0 0 0 1 0 08/04/2021 15:39:30 Power Failure or Unknown 0 0 0 1 0 08/04/2021 18:03:26 stack merge 0 0 0 1 58 08/05/2021 11:00:07 stack merge 0 0 0 16 0 08/05/2021 11:06:41 Reload Slot Command 0 0 0 0 0 --------------------------------------------------------------------------------
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide