11-09-2012 09:31 AM - edited 03-07-2019 09:58 AM
Hi Everyone,
I need to open Port 3389 on my router to have RDP to PC.
Need to know how can i open it.
Router is doing NAT and connected to ISP.
Also Router has connection to Layer 3 switches and PC is connected to one of those L3 switch.
Thanks
Mahesh
Solved! Go to Solution.
11-09-2012 09:54 AM
Hi Mahesh,
Try something link this:
access-list 100 permit tcp any eq 3389
ip nat inside source static tcp xx.x.x.x 3389 interface gigabitEthernet x/x
HTH
11-09-2012 10:07 AM
Hi Mahesh,
so XXXX will be the IP of PC right?
correct
gigabitEthernet x/x which interface is this ? switch port connected to PC
this is the interface that is connected to the ISP (outside interface)
HTH
11-09-2012 09:54 AM
Hi Mahesh,
Try something link this:
access-list 100 permit tcp any eq 3389
ip nat inside source static tcp xx.x.x.x 3389 interface gigabitEthernet x/x
HTH
11-09-2012 10:02 AM
Hi Reza,
so XXXX will be the IP of PC right?
gigabitEthernet x/x which interface is this ? switch port connected to PC
Thanks
Mahesh
11-09-2012 10:07 AM
Hi Mahesh,
so XXXX will be the IP of PC right?
correct
gigabitEthernet x/x which interface is this ? switch port connected to PC
this is the interface that is connected to the ISP (outside interface)
HTH
11-09-2012 10:37 AM
Hi Reza,
Many thanks i will give it try today.
Here too much snow in calgary these days.
Regards
Mahesh
11-09-2012 11:04 AM
Good Luck Mahesh!!
Keep warm
Reza
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide