OSPF BFD configuration on ASR 1002x

[msaltunsaray]

I would like to enable ospf bfd for all ospf interfaces.

What is the default OSPF BFD default values if I dont configure interval, min-rx, and multiplier?

System image file is "bootflash:/asr1002x-universalk9.03.10.01.S.153-3.S1-ext.SPA.bin"

[Reza Sharifi · Accepted solution]

Default is "bfd interval 50000 min_rx 50000 multiplier 3"
see link:

https://www.cisco.com/en/US/technologies/tk648/tk365/tk480/technologies_white_paper0900aecd80244005.html

HTH