05-06-2012 10:58 AM - edited 03-07-2019 06:32 AM
Hi
I have a network with static routes witch I need to convert to OSPF.
Never used OSPF, and do not have much experience in routing in general.
The netvork is connected via some fiber links, but moastly wireless bridges.
I have attached a drawing of how the network is.
Routers are 3550, 3560 and 3750s.
Each router is on a different physical site.
Can anybode explain the best way to solve this?
I will be very greateful.
05-06-2012 11:11 AM
Hi
You can creat an area 0 and add each router to it
Example for one router
Router OSPF 1
Network 10.10.10.0 0.0.0.255 area 0
In this example 10.10.10.0/24 is the subnet for one of vlan in that router
Do the same for the other routers just different subnets
HTH
Sent from Cisco Technical Support iPhone App
05-06-2012 11:12 PM
Thanks
But shuld all sites be in the same area, when should I devide into different areas?
What about setting cost etc?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide