cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
240
Views
0
Helpful
1
Replies

ospf link flapping

krutibasa majhi
Level 1
Level 1

I am troubleshooting an issue between ASR 9K and ASR 1002X  routers The ospf session between these two routers keeps going down and up.

 

Below is my 1002x log ,10.255.252.10 is my ASR9K loopback.

108257: Apr 18 19:33:40.318: %OSPF-5-ADJCHG: Process 1, Nbr 10.255.252.10 on GigabitEthernet0/0/0.40 from FULL to DOWN, Neighbor Down: Too many retransmissions
108258: Apr 18 19:33:41.938: %OSPF-5-ADJCHG: Process 1, Nbr 10.255.252.10 on GigabitEthernet0/0/0.30 from FULL to DOWN, Neighbor Down: Too many retransmissions
108259: Apr 18 19:33:42.597: %OSPF-5-ADJCHG: Process 1, Nbr 10.255.252.10 on GigabitEthernet0/0/1.20 from FULL to DOWN, Neighbor Down: Too many retransmissions

kindly suggest what to do.

 

 

 

 

 

 

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Can you post the configs from both devices?

Why are you peering with the same device 3 times (GigabitEthernet0/0/0.40, GigabitEthernet0/0/0.30, GigabitEthernet0/0/0.20)?

HTH

Review Cisco Networking for a $25 gift card