Switching

Thank you for taking your time to read this. I made 2 big mistake that cause my Sup720-3B show black screen on console. Story:I just got a pair of Sup720-3B on my 6506E. I was trying to tftping new IOS to the sup-bootdisk of the active Sup720-3B. In ...

 Hi.. I have been running VSS on cisco WS-C4506-E, Supervisor 7L-E, ver 03.05.03.E. I am looking for configuring WCCP on this switch. Pls confirm me if WCCP is supported in VSS and  if yes how could i enable this, pls share any best document.

 https://supportforums.cisco.com/document/12268456/cisco-aci-architecture-simplified 

Hi all,   Please help with the following issue: we're currently have a switch stack (9 units) of 3750s, we now want to break up this stack and have dual connections to distribution switches. Is there anything which we should be aware of and how to br...

Hello.Please help me, is possible to see the capacity of router cisco's processor in MHz o GHz, thans for your help.

I have a trouble with configuration of Cisco Catalyst 3850 (WS-C3850-24T-E). Hyper-V server (2012R2) is connected to it. My issue is to separate the virtual machines on the Layer 2 Level. The virtual machines located in the same subnet.  I chose to ...

Hi all.I have configured a Bundle-Ether with four TenG interfaces. All of them are LANphy mode. What is the real maximum bandwidth available in this scenario?. The End customer administrador says he saw a documment in wich the real throughput is 92%....

Hey guys,I'm having an issue that partially brought down our network. Just wondering if someone could help me out. I've gone through previous posts regarding looping through IP phones but none really came to a definate conclusion.So a user plugged bo...

heey everybody ,i have 2 adsl links and have cisco router 1841 , i want to make load balance or failover between links what's my requirements , and best solution ?do i will add any interface in router ??? i need all feedback please cisco

let's say I have a router on a stick topology with 2 sub-interfaces, representing 2 vlans.  let's say one of these is untagged.  When my router receives traffic from the untagged vlan it's going to be expecting a vlan tag per the command encapsulatio...