OSPF on 2126 router Version 12.2(7r)

[winston123]

Hello

Team,

How can I add a statement on like the one below for OSPF. I would like to add the statement as follow: O    192.168.3.0/24 [110/11] via 192.168.101.5, 3d00h, FastEthernet0/1.

I just can't seem to find the right commands.

O E2 192.168.6.0/24 [110/20] via 192.168.101.5, 3d00h, FastEthernet0/1
O E2 192.168.7.0/24 [110/20] via 192.168.101.5, 3d00h, FastEthernet0/1
O    192.168.1.0/24 [110/11] via 192.168.101.5, 3d00h, FastEthernet0/1

My OSPF is this

router ospf 1
log-adjacency-changes
area 0 authentication message-digest
network 10.0.0.3 0.0.0.0 area 0
network 10.254.254.2 0.0.0.0 area 0
network 192.168.100.0 0.0.1.255 area 0

Thanks

[cadet alain]

Hi,

Then you'll have to go on 192.168.101.5 and issue:

router ospf 1

network 192.168.30. 0.0.0.255 area 0

Regards.

Alain.

[winston123]

Thanks Alain,

Just want to make sure you did not leave anything out. It seems you meant to give me further instructions when you say: Then you'll have to go on 192.168.101.5 and issue.

Just checking., If you got something else to add, it will definetely be welcome. I will wait for your reply before i start implementing.

Thanks

[cadet alain]

No,

That was all I wanted to say.

Regards.

Alain.