cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
351
Views
0
Helpful
3
Replies

Ospf Time expired

Firass
Level 1
Level 1

Hello All, 

 

I have 2 Distrubition layer one is work normal after the ospf but the other all the time i receive this massage 

 

the two dis ccconnect with the core by OSPF 

 

*mars 05, 03:22:27.2222: 03:22:27: %OSPF-5-ADJCHG: Process 1, Nbr 10.47.200.1 on Vlan20 from FULL to DOWN, Neighbor Down: Dead timer expired

*mars 05, 03:22:27.2222: 03:22:27: %OSPF-5-ADJCHG: Process 1, Nbr 10.47.200.1 on Vlan20 from FULL to DOWN, Neighbor Down: Interface down or detached

*mars 05, 03:22:27.2222: 03:22:27: %OSPF-5-ADJCHG: Process 1, Nbr 10.47.200.1 on Vlan20 from LOADING to FULL, Loading Done

 

thanks 

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

Can you check the interface for error messages?

Is the interface flapping as well?

Can you post config form both devices?

HTH

 

Hi!

Which Cisco switch are you running?

How many vlans have you on those Interfaces?

 

/Mohammed

Hello

You could also enable debugging to see what is causing the flap.

 

debug ip ospf adj

 

 

res

Paul

 

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul
Review Cisco Networking for a $25 gift card